>
Product >
Electric Vehicle Charger >
Charging Socket >
Socket-Inlet >
FGDC-T-200A-V-03-0.0M-50A(H)
.jpg)
FGDC-T-200A-V-03-0.0M-50A(H)
22060000062
Charging device socket outlet, used for charging electric vehicles (EV) with direct current (DC), compatible with national standard DC vehicle charging device plugs, for installation on electric vehicles.
- Overview
- Technical data
- Accessories
- Certification
- Business data
- Download
Product certification
Product advantages
☑ All vehicle sockets and charging sockets of Degson are designed with a unified design.☑ The power and signal contacts are both with silver-plated surfaces.
☑ Certified to IATF 16949:2016
☑ Conforms to ergonomics, easy to operate.
- 3D model
- Dimension
- Environmental conditions
- Environment condition
- Electrical characteristics
- Mechanical properties
- Installation
- Marking material
- Locking device
- Temperature Sensor
- Environmental Product Compliance
- General parameters
- Cable
3D model
Dimension
| Height | 95mm |
| Depth | 84.2mm |
| Hole diameter | 72 mm x 72 mm |
| Wire length | 0m |
Environmental conditions
| Ambient temperature (operation) | -30 °C ~ 50 °C |
| Maximum altitude | 5000m(Above sea level ) |
| IP class | IP55(coupling) |
Environment condition
| Ambient temperature (storage/transportation) | -40°C ~ +80°C |
Electrical characteristics
| Maximum charge power | 200KW |
| Phase | 3 |
| Power pin quantity | 9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2) |
| Rated current of high-power contacts | 200 |
| Power contact rated voltage | 750 |
| 1000 | |
| Quantity of signal contacts | 4(S+,S-,CCS1,CCS2) |
| Signal contact rated current | 2 |
| Signal contact rated voltage | 30 |
| Signal transmission type | Pulse width adjustment |
| Connection method precautions | Crimp connection, cannot be disconnected |
| Temperature measurement | 2x Pt 1000 (DIN EN 60751) |
| PT1000 |
Mechanical properties
| Insertion force | <140N |
| Pull out force | < 140N |
Installation
| Available installation location | Installation in front of the board |
| Limit of the installation location | Only allow 0 to 90 degrees frontal tilt |
| Mounting hole diameter | 7.00 mm (ø) |
Marking material
| Shell color | black |
| Customization basis | Provided according to customer requirements |
| Contact surface material | Ag |
| Marking material | Plastic |
Locking device
| Lock type | Secured by locking device after insertion |
Temperature Sensor
| Standard | DIN EN 60751 |
| Recommended measured current | 1 mA (1 V at 0°C ) |
| Recommendation to measure tolerance on current sensors | ±1K |
| Temperature range | _50 °C ... 150 °C |
| Temperature coefficient (TCR) | 3850 ppm/K |
| Long-term stability（maximum R0-Drift) | 0.06 % (After 1000 hours at 130°C ) |
| Shutdown temperature | 90 °C Equivalent to Pt 1000 value 1346.5 Ω |
Environmental Product Compliance
| REACH | conform |
| China RoHS | conform |
General parameters
| Insertion and pullout cycle | ≥ 100 |
Cable
| Cable composition | 2 x 50 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm² |
GB/T parameters
| Rated voltage | 1000V | ||
| Rated current | 200A |
| Order number | |
| Packing unit | |
| Minimum order quantity | |
| Products weight (without packaging) |
